Monday, February 12, 2018

Bird House Treat Box



Bird House Treat Box-JMR
Approximate size: W 3 x D 1.75 x H 3.5”
Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top and is apart of the Love Bird baby shower collection. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)


1.Cut design pieces. ( I used double sided card stock)
2. Fold the bird house base at the score lines. Curve the flowers and leaves as you like.
3. Connect the two wing tabs on the bottom.
4.Fold in the small bottom tab.
5. Apply glue to the side tab and connect the side panel.
6. This is what it should look like:)


7. Apply glue to the bottom tabs and secure the last bottom panel; aligning the sides.
8. This is what it will look like:)
9. Push in the two top handle panels.
10. This is what it will look like:)
11. Apply glue to the backside of one of the flower shapes around the center hole. Attach to the center of one of the brown circles.
12. Apply glue to the backside of the matching flower shape and attach to the combined flower petal; alternating petal pattern.


13. Repeat for the other flower sets. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces.
14.-15. Attach the roof top pieces to the top of wither side; aligning with the coordinating edge of the bird house base. Attach the two smaller combined flowers to the front of the combined bird house base with foam adhesive squares. ( The images are out of order…sorry:)
16.-17-18. Use two foam adhesive squares ( on top of one another) to attach the larger combined flower in the center and slightly higher than the other two flowers. Apply glue to the backside bottom of the leaves and attach them underneath the flowers. The top opens and shuts easily so that you can fill with treats. Finish with a ribbon:)


Also see coordinating Love Birds Baby shower
Invitation, Book plate request cards, Love Birds Egg Card, Bird House Treat Box, and Love
Birds Sticker Sheet:)




Wednesday, February 7, 2018

Birdcage Card


Birdcage Card-JMR
Approximate size: W 3” X H 5 3/8”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)
2. Fold the card at the score lines. Use a foam adhesive squares to attach the birdcage with out outs to the front of the card base. Curve the flower petals and leaves as you like.
3. Apply glue to the backside of one of the flower shapes around the center hole. Attach to the center of one of the brown circles.
4. Apply glue to the backside of the matching flower shape and attach to the combined flower petal; alternating petal pattern.
5. Repeat for the other flower sets.
6. Glue the two smaller combined flowers to the front of the combined card base on either side.
7. Use a foam adhesive square to attach the larger combined flower in the center and slightly higher than the other two flowers. Apply glue to the backside bottom of the leaves and attach them underneath the flowers. Finish with a ribbon:)



Unicorn Candy Pocket




Unicorn Candy Pocket-JMR
Approximate size: W 3.75” X H 7.25”
Approximate Pocket size: W 2.5” X H 3.25”

The Unicorn Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, a gift card, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)
2. Fold the tabs on the unicorn base. Apply glue to the tabs. Fold forward and secure to the unicorn shape of the base. Glue the black unicorn face to the large pink unicorn head with a mane; aligning at the ears. Glue the unicorn horn with cutouts to it’s matching solid base.
3. Use foam adhesive squares to attach the tail to the bottom of the unicorn base and the unicorn face with cutouts to the combined unicorn head; aligning at the ears.
4. Using foam adhesive squares, attach the small pink hair piece to the coordinating shape on the combined unicorn head base. Place two small pieces of foam adhesive square to the black horn section.
5. Place a tab of glue on the backside bottom of the combined horn piece and secure to the coordinating shape on the combined unicorn head. The foam adhesive piece you placed on the last step will help to secure it on.
6. Insert Ghirardelli® chocolate square, other snack sized candy, or gift card into the pocket. Tuck the Unicorn’s hands into the slots in the center.

7. Use a foam adhesive square to attach the heart:)

Tuesday, February 6, 2018

Love Bird Sticker Sheet






Love Bird Sticker Sheet-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222


Also see coordinating Love Birds Baby shower
Invitation Set, Love Birds Egg Card, Bird House Treat Box, and Love
Birds Sticker Sheet:)


Monday, February 5, 2018

Love Bird Girl



Love Bird Girl-JMR


Love Bird Boy-JMR

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Also see coordinating Love Birds Baby shower
Invitation Set, Love Birds Egg Card, Bird House Treat Box, and Love
Birds Sticker Sheet:)


1.Cut design pieces. ( I used double sided card stock)
2. Glue the wings to the bird shape with eye cut outs. Use a small piece of foam adhesive square to attach the beak.
3. Use a foam adhesive square to attach the combined bird image to the bird base. Glue the limb piece to the top of the combined piece.
4. Glue the bird’s feet on:)

Love Bird Egg Baby Shower Invitation Set

Love Bird Egg Baby Shower Invitation Set-JMR


This cute Love bird print and cut invitation set is perfect for baby showers. The set contains an Invitation (W 4” x H 5.5”), a storybook request card (W 4.25” x H 2.25”), and matching bookplate (W 4.25” x H 2.25”). This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Love Bird Egg Card


Love Bird Egg Card-JMR
Approximate size: W 4.25 x H 4.5”

This cute tri-panel love bird card opens from each side and is perfect for baby showers or for pregnancy announcements. This design is compatible with both 8X12 and 12X12 mats.

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock and vellum paper)
2. Glue the heart shape to the center of the card base;centering it. Line up the girl and boy birds. Glue the tree libs to each bird making sure the limbs line up. Use foam adhesive squares to attach the wings to each bird.
3. Use a foam adhesive square to attach the egg; centering it. Attach the boy beak to the boy bird using a piece of foam adhesive square and glue the feet to each bird on top of the limbs.
4. Use a tiny piece of adhesive square to attach the small oval beak piece to the large beak base for the girl bird. Fold the score lines of the card base.
5. Glue the girl bird beak into place.
6. Use foam adhesive squares to attach the girl bird to the card base. 
7. Use foam adhesive squares to attach the boy bird to the card base.
8. I finished with a ribbon:)

Love Hanging Tea Light Lantern



 Love Hanging Tea Light Lantern-JMR
Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1.Cut design pieces. ( I used double sided card stock and vellum paper)
2. Flip the two love lantern window pieces over. Glue the vellum paper to the window panels; centering around each of the cut out sections.
3. Fold all score lines.
4. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.
5. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box.
6. This is what it should look like:)
7. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle.
8. Repeat for the rest of the top tabs until fully enclosed.
9.You can use a long utensil to help secure the tabs from the inside of the lantern.
10. Apply glue to the inside of one of the circular hanger pieces. Align with the other circular hanger piece and secure.
11. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides. 
12. Repeat for the two top tabs creating a shallow box.
13. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)
14.  Tuck the end tab into the slot creating a circular tube shape. Secure until dry.
15. Place the narrow circular ring piece and square piece over the tube shape you just created.

16. Apply glue to the outside of the tabs on the round side and secure downward to the round piece.



17. Apply glue to the top.
18. Secure the large ring to the top;centering it.
19. Insert flameless votive candle from the bottom.Flip this piece over so the Square side is up. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.
20. Apply glue to the bottom and insert into the shallow square lantern base.
22. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 
lantern tea light base. Place inside the lantern square base and secure.
23. Bottom view.
24. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. 
25. I finished this lantern with a ribbon:)