Monday, September 28, 2015

Frankenstein Slider Hatch Treat Box


Frankenstein Slider Hatch Treat Box- JMRush

Finished Box Dimensions (approximate)- W 2” x H 4” x D 7/8”

This cute little Frankenstein treat box is perfect for classroom parties. This treat box has a hatch opening and will hold 3-4 “mini” candies. This design is compatible with 8x12 or 12X12 mats.




Frankenstein Slider Hatch Treat Box Tutorial- JMRush


  1. Cut the design pieces.
  2. Pre-fold all score lines.
  3. ( pictures 3-6) Place the tab of the face piece through the slot of the inside wing piece on each side. ( you will need to bend the pointed tab a bit to get it into the slot) Make sure that the tab is on the outside of the wing piece.
     7. Apply glue to the lower wings.
     8. Secure the lower wings and lower box section together.
    9. Glue the upper section’s wings to the box base (careful not to glue the tabs. They must remain free in order for the hatch to open properly.)
    10. 11. Apply a small tab of glue to the top inside to secure it (make sure your hatch will still open properly).
    12. Apply glue to the bottom and top of the black eye piece and secure it into place.
    13. Secure the white eye piece into place and glue the stitches and mouth piece into place.
    14. Glue the screw heads to the screw backgrounds.
    15. Attach the screws to the side of the box using foam adhesive squares.
    16. Your box should be able to contain 3-4 "mini" size candies:)

Spider and Web Cube


Spider and Web Cube -JMRush
Finished dimensions of the box: L 2.5 X W 2.5 X H 2.5

This spooky spider and web cube is a fun way to enclose Halloween goodies or use vellum on the inside to transform this cube into a flameless candle votive. This design is compatible with both 8X12 and 12X12 mats. 




Flower Ribbon Basket

Flower Ribbon Basket -JMRush
Finished dimensions of the basket: L 4.5 X W 4.5 X H 3.25 (approximate)

The Flower Ribbon Basket is super simple to construct. Approximately 30” length of 1/4”( or smaller) ribbon or twine is required. The outer basket has a beautiful flower cut design and the inside box is solid so it will hold your goodies securely. Use them together or separately. This design requires a 12X12 mat.




Candy Corn Witch Hat Basket


Candy Corn Witch Hat Basket-JMRush

 Basket size: W 4" X  H 2.25”
 Hat Size ( approximate): W 6” X H 5.5”

This Halloween styled treat basket can be cut in multiple colors to make a candy corn design or in a single color to make a solid colored witch hat. 20” of 1/4” ( or smaller width) ribbon or twine is needed to complete the basket. This design is compatible with 8x12 or 12X12 mats.



Thursday, September 24, 2015

Octagonal Ribbon Basket


Octagonal Ribbon Basket -JMRush

Basket size: W 4" X  H 2.25”

The Octagonal Ribbon Basket one piece design makes it super easy to construct. It requires 30” of 1/4” (or smaller width) ribbon or twine. This design is compatible with both 8X12 and 12X12 mats. 

Lattice 3D 4X6 Frame

Lattice 3D 4x6 Frame - JMRush 
Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This frame has a intricate cut design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file (excluding your pictures;) This design requires a 12X12 cutting mat.





  1. Cut out design piece.
  2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
  3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later and so that inserting your photo is easy:)
  4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
  5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
  6. Repeat this steps for each of the frame sides.
  7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
  8. Repeat for each tab.

Pumpkin 3D 4X6 Frame


Pumpkin 3D 4x6 Frame - JMRush 
Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This Autumn themed frame has a intricate cut Pumpkin/leaf design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file (excluding your pictures;) This design requires a 12X12 cutting mat and contains a print and cut feature for the pumpkin and leaves. The pumpkin and leaves can also be used separately.



  1. Cut out all design pieces.
  2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
  3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later and so that inserting your photo is easy:)
  4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
  5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
  6. Repeat this steps for each of the frame sides.
  7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
  8. Repeat for each tab.
  9. Place the print and cut Pumpkins and leaves on top of the base frame and glue into place.
  10. (I used foam adhesive squares to adhere them into place on the frame to give them dimension. Happy Crafting:)

Monarch Butterfly Small Favor Box



Monarch Butterly Small Favor Box- JMRush
Finished dimensions of the box (approximate): L 3” X W 2.25 X H 1.5

The Monarch Butterfly Favor Box contains a print and cut file for the Monarch which can also be used separately. This little box is perfect to enclose a small gift or goodies. This design is compatible with both 8X12 and 12X12 mats. 



Fall Leaves 3D 4X6 Frame

Fall Leaves 3D 4x6 Frame - JMRush 
Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”


This Autumn themed frame has a intricate cut leaf design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file ( excluding your pictures;) This design requires a 12X12 cutting mat and contains a print and cut feature for the leaves. The leaves can also be used separately.









Wednesday, September 23, 2015

Sketch Toy Picture Frame

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8"
  1. Cut out all design pieces.
  2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
  3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later:)
  4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
  5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
  6. Repeat this steps for each of the frame sides.
  7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
  8. Repeat for each tab.
  9. Insert your picture.
  10. Place the Sketch frame on top of the base frame and glue into place.
  11. Glue the knobs together and using foam adhesive squares adhere them into place on the frame. Happy Crafting:)
Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8"
This design requires a 12X12 mat.


Tuesday, September 22, 2015

Master View Treat Box


Master View Treat Box -JMRush

Finished dimensions of box: L 4 x W 2 1/4 x H 3
The Master View treat box is definitely old school. This cute treat box can be filled with your favorite goodies. This design requires a 12X12 mat.




Also see: You Rule! Box for more detailed written instruction


Monday, September 14, 2015

You Rule! Box








You Rule! Box  - JMRush 
Finished dimensions of box: L 4 x W 2 1/4 x H 3
You Rule! This funny treat box is perfect for a simple thank you gift. Fill it with your favorite goodies and give it to that special teacher who has shown great patience during the school year;) This design requires a 12X12 mat.





1. Cut your shapes and lay out. 

2. Place the Box base Decorative side face down. 
3. Fold the side panels inward to the center.

4. Fold the front tab toward the center and crease the score lines. 

5. Fold the second front tab toward the center and crease the score lines. 

6. This is what is looks like laying flat.

7. Crease the rest of the perforated lines on the side panels.  Red lines fold inward. Green lines will go outward.



8. Green dots glue together and yellow dots glue together on the inside of the the card base.




9. Repeat for the front side.

10. Fold the small side top tabs in. Fold the lid into the front section, leaving the tab on the outside. Center and glue the Ruler to the Ruler base rectangle. 


11. Center the ruler on the lid tab and glue into place. Center and glue “You Rule!” to the card base. 

12. You can place a ribbon through the holes on the top to add a decorative bow. Ta Da! 


OR more detailed instructions......








Friday, September 11, 2015

Game Controller Card

Game Controller Card -JMRush


 This print and cut card is perfect for your gamer. The card measures W 5.5 x H 3.5 and will easily fit a 4.37 x 5.75 standard envelope. This print and cut file has separate circular joystick designs that can be attached to the card base with foam square adhesive to give your card a little pop of detail. This design is compatible with both 8X12 and 12X12 mats.

Spell LOVE YOU Card

Card size: 4.25 X 5.5
I am taking it back old school again:) This easy to construct card is a retro way to express your love! This design is compatible with both 8X12 and 12X12 mats.


Color Cube Treat Box




Finished dimensions of the box: L 2.5 X W 2.5 X H 2.5
Who remembers spending hours upon hours of your childhood trying to get your cube to look like this again? This color cube treat box is a fun way to enclose a small gift or goodies. This design is compatible with both 8X12 and 12X12 mats.




Bundle of Joy Pocket Card



Card size: W 4.25" X 5.5"
Have an announcement to make? What a sweet way to spread the word that you have a baby on the way. This pocket card has a removable insert that is ready for all of your details. This design is compatible with both 8X12 and 12X12 mats. 

Bun in the Oven Sonogram Picture Frame

Bun in the Oven Sonogram Picture Frame -JMRush

Mailable Frame size: W 5" X 6.75”


Have an announcement to make? What a sweet way to spread the word that you have a baby on the way. This Bun in the Oven Sonogram frame fits the average sonogram pic size of W 3 3/4” X H 2 7/8”. This design is compatible with both 8X12 and 12X12 mats an is flat so it is perfect for placing in the mail to relatives. 


Bun in the Oven Card



Bun in the Oven Card -JMRush

Card size: W 4.25" X 5.5”


Have an announcement to make? What a cute way to spread the word that you have a baby on the way. This Bun in the Oven Card is super simple to construct and is compatible with both 8X12 and 12X12 mats and is flat so it is perfect for placing in the mail for pregnancy announcements or baby shower invites.